Safes and Vaults are our speciality.

Some specialities of Mark of Bogman safes in order of rank:

• Weapon Safes
• Vaults
• Safes

Weapon safe

Mark Bogman safes conduct a large assortment weapon safes and as a result everyone can find a suitable weapon safe. In a special overview you can find an abbreviated description of each weapon safe which we provide presently.

Go to the overview: Weapon Safes.

Vault

Mark Bogman vaults conduct a large assortment safes and as a result everyone can find a suitable vault. In a special overview you find an abbreviated description of each vault which we provide presently.

Go to the overview: Vaults.

Safe

Mark Bogman safes conduct a large assortment safes and as a result everyone can find a suitable safe. In a special overview you find an abbreviated description of each safe which we provide presently.

Go to the overview: Safes.

General information about our products:

Weapon safes

Weapon safes are dedicated to the safe storage of guns and ammunition protected from unauthorized use, theft or burglars.

Mark Bogman Safes BV provides gun cabinets and safes of high quality made by well-known manufacturers and certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the weapon safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the relevant weapon safe (however, this is applicable only in case that the safe is fixed/anchored by using reasonable means or if the safe weighs more than 1 metric ton).

The indication of the insurance classification is in accordance with the European standard CEN 1143-1 classes 0 - 1. Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Other indication of insurance classification: VDMA classes A and B.

Safe storage of ammunition is achieved by way of a separate and lockable safe inside the weapon safe.

Weapon cabinets and safes are available in various sizes and several safety classes.

Mark Bogman Safes BV offers a wide range of products: weapon cabinets and weapon safes without insurance classification or with classifications in accordance with VDMA classes A and B, VDS classes 0 - 1.

Go to the overview: Weapon safes.

Data Safes

Data safes are protected storage systems especially suited for the safe storage of digital data carriers in a variety of formats such as tapes, disks, CD-ROMs etc.

Mark Bogman Safes BV provides data safes, media boxes and hardware safes of the highest quality made by well-known manufacturers; the products are certified in accordance with the relevant European standards.

Digital data carriers may show first signs of damage (or complete loss of data) at an ambient temperature of 125°F (52°C) or at a relative humidity of only 80 %!

Today, data carriers in a variety of formats play a continuously increasing role within any modern operating company. Importance and value of intact data inventories have finally resulted in data safes and vaults being tested and certified in accordance with the most stringent standards available.

In order to test the fire resistance, safes are subjected to a temperature of 1,994°F (1,090°C) for a time period of 1 - 2 hours. Then, the red-hot safes are subjected to a drop-shatter test (dropping height: 9.15 metres).

Then, the safes are again subjected to 1,994°F (1,090°C) for another 30 - 45 min. and the safes are certified only if they have successfully passed all these tests.

Data safes are available in different categories and in combination with an increasing protection class with regard to their burglar safety.

Mark Bogman Safes BV provides a wide range of safety related products such as: data safes, fire protected for data from 60 to 120 minutes, in combination with burglar protection VDMA classes A and B and VDS classes 1 and 2.

Go to the overview: Data safes.

Storage Systems for Hazardous Substances

Storing hazardous substances requires proper devices to be used in order to prevent and avoid dangerous situations that may occur in conjunction with the use or processing of hazardous substances.

Mark Bogman Safes BV offers a broad range of products for the storage of hazardous substances: safety cabinets, storage cabinets for gas cylinders (in-house/out-house), steel or polyethylene sumps, steel or polyethylene storage systems, polyethylene depots, system containers, chemical containers as well as modular containers.

These top-of-the-range products are available from Mark Bogman Safes BV; all products come equipped with the safety certificates required in accordance with the relevant European standards.

Consultants and recent research reports differentiate between small supplies, medium-sized supplies and large supplies of hazardous substances. Mark Bogman Safes BV has solutions for all of these situations and provides safe and proper storage devices for individual purposes.

All devices for the storage of hazardous substances are certified in accordance with the stringent regulations of PGS15 (formerly CPR 15-1, 15-2 and 15-3).

Go to the overview: Storage Systems for Hazardous Substances.

Vaults

Vaults are safety storage devices for protecting valuables such as money or valuable objects against burglars and adverse effects from the outside.

Mark Bogman Safes BV provides vaults of the highest quality made by well-known manufacturers; the products are certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the vault) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the relevant vault (however, this is applicable only in case that the vault is fixed/anchored to the ground with reasonable means - exception: vaults weighing above of 1 metric ton).

The insurance classification is indicated in accordance with the European standard CEN 1143-1 classes 4 - 6. Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Mark Bogman Safes BV offers a wide range of products: vaults of VDS classes 4 - 6, (incl. EX = explosion protected).

Go to the overview: Vaults.

Safes

Safes are protected storage systems for protecting important documents such as ID cards, property evidence, sales contracts or other property related documents or objects with high (emotional) value.

Safes not only provide protection against fire and burglars; they also protect your valuables effectively against other adverse effects from outside.

Mark Bogman Safes BV provides safes of the highest quality made by well-known manufacturers; the products are certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the relevant safe (however, this is applicable only in case that the safe is fixed/anchored to the ground with reasonable means - exception: safes weighing above of 1 metric ton).

The insurance classification is indicated in accordance with the European standard CEN 1143-1 classes 1 - 3. Certification of our high quality products is performed by an independent German technical institute, the VDS in Cologne.

Mark Bogman Safes BV offers a wide range of products: safes of VDS classes 1 - 3.

Go to the overview: Safes.

Furniture Safes

Furniture safes are secure safety storage systems for the protection of ID cards, property evidence, sales contracts or other valuable documents or objects of high (emotional) value.

Furniture safes allow for optimum protection against fire, burglars and also against any adverse effects from outside.

Mark Bogman Safes BV provides a broad range of furniture safes of the highest quality made by well-known manufacturers; the products are all certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the furniture safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the relevant furniture safe (however, this is applicable only in case that the furniture safe is fixed/anchored by using reasonable means - exception: furniture safes weighing above of 1 metric ton).

The insurance classification is indicated in accordance with the European standard CEN 1143-1 class 0. Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Other indications of the insurance classification: VDMA classes A and B as well as the new standards S1 and S2.

Mark Bogman Safes BV provides a broad range of furniture safes: VDMA classes A and B, S1, S2 and VDS class 0.

Go to the overview: Furniture Safes.

Key Box Key Safes

A key box is a protected storage system for storing keys.

Mark Bogman Safes BV provides key boxes, key safes, key security boxes and key managers of the highest quality made by well-known manufacturers and certified in accordance with the relevant European standards.

Mark Bogman Safes BV provides a broad range of key boxes: key boxes without insurance protection.

A key safe is a specially protected storage safe for the safe storage of keys preventing the misuse or theft of important keys.

Mark Bogman Safes BV provides key boxes, key safes, key security boxes and key managers of the highest quality made by well-known manufacturers and certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the key safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the relevant key safe (however, this is applicable only in case that the safe is fixed/anchored by using reasonable means - exception: safes weighing above of 1 metric ton).

The insurance classification is indicated in accordance with the European standard CEN 1143-1 class 1. Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Other indication of insurance classification: VDMA classes A and B.

Mark Bogman Safes BV offers a wide range of products: key safe VDMA classes A and B and VDS class 1.

Go to the overview: Key Box Key Safes.

Deposit Safes

Deposit safes are suited for the short-term storage of money in cash, cheques, keys and valuable documents.

The deposit safes allow immediate reduction of the risk of theft.

Mark Bogman Safes BV provides a broad range of high-quality deposit safes made by well-known manufacturers and certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the deposit safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the relevant deposit safe (however, this is applicable only in case that the deposit safe is fixed/anchored by using reasonable means or if the safe weighs more than 1 metric ton).

With regard to deposit safes, two standards apply: CEN 1143-1 and CEN 1143-2 classes 1 - 4.

The difference between the two standards is that CEN 1143-1 concerns analogous certification, while CEN 1143-2 (since 2003 the new European standard) certifies the entire deposit safe including the deposit drawer.

Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Other indication of insurance classification: VDMA classes A and B.

Mark Bogman Safes BV offers a wide range of products: deposit safes VDMA classes A and B and VDS classes 1 - 4.

Go to the overview: Deposit Safes.

Deposit Safes

Deposit safes are suited for the short-term storage of money in cash, cheques, keys and valuable documents.

The deposit safes allow immediate reduction of the risk of theft.

Mark Bogman Safes BV provides a broad range of high-quality deposit safes made by well-known manufacturers and certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the deposit safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the relevant deposit safe (however, this is applicable only in case that the deposit safe is fixed/anchored by using reasonable means or if the safe weighs more than 1 metric ton).

With regard to deposit safes, two standards apply: CEN 1143-1 and CEN 1143-2 classes 1 - 4.

The difference between the two standards is that CEN 1143-1 concerns analogous certification, while CEN 1143-2 (since 2003 the new European standard) certifies the entire deposit safe including the deposit drawer.

Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Other indication of insurance classification: VDMA classes A and B.

Mark Bogman Safes BV offers a wide range of products: deposit safes VDMA classes A and B and VDS classes 1 - 4.

Go to the overview: Deposit Safes.

Document Safes and Cabinets with protection against fire and heat

Document safes and cabinets with fire protection are storage systems for the protected storage of archives and other valuable documents.

Mark Bogman Safes BV provides a broad range of high-quality products of archive cabinets, document safes and file cabinets made by well-known manufacturers and certified in accordance with the relevant European standards.

In general, paper starts to suffer serious damage at a temperature of 347°F (175°C) already. Therefore, fire protecting safes and cabinets are subjected to the most challenging tests and certified in accordance with the most stringent standards.

In order to test the fire resistance, cabinets are subjected to a temperature of 1,994°F (1,090°C) for a time period of 1 - 2 hours. Then, the red-hot cabinets are subjected to a drop-shatter test (dropping height: 9.15 metres).

Then, cabinets are again subjected to 1,994°F (1,090°C) for another 30 - 45 minutes, and only if the cabinets have successfully passed this final test will they receive the respective certification.

Fire protecting safes and cabinets are available in several classes.

Mark Bogman Safes BV offers a wide range of products: cabinets with fire protection from 30 - 120 min. for paper.

Go to the overview: Document Safes and Cabinets.

Pistol Safes

The purpose of pistol safes is the safe storage of hand held weapons and ammunition. In addition, pistol safes offers good protection against unauthorized use, theft and burglars.

Mark Bogman Safes BV provides a broad range of pistol safes of high quality made by well-known manufacturers and certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the pistol safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the relevant pistol safe (however, this is applicable only in case that the safe is fixed/anchored by using reasonable means or if the safe weighs more than 1 metric ton).

The indication of insurance classification is in accordance with the European standard CEN 1143-1 classes 0 - 1. Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Other indication of insurance classification: VDMA classes A and B.

Safe storage of ammunition is achieved by way of a separate and lockable safe inside the pistol safe.

Pistol safes are available in various sizes and several safety classes.

Mark Bogman Safes BV offers a wide range of products: pistol safes without insurance classification, VDMA class B and VDS classes 0 - 1.

Go to the overview: Pistol Safes.

Wall Safes

Wall safes are burglar-safe storage systems integrated into the inside walls of buildings at inconspicuous locations; our wall safes are provided with a space saving design concept.

Mark Bogman Safes BV provides wall safes of the highest quality made by well-known manufacturers and certified in accordance with the European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the wall safe (however, this is applicable only in case that the safe is fixed/anchored by using reasonable means).

The indication of insurance classification is in accordance with the European standard CEN 1143-1 classes 0 - 1. Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Other indication of insurance classification:VDMA classes A and B.

Wall safes are available in various sizes and different safety classes.

Mark Bogman Safes BV offers a wide range of products: wall safes without insurance classification, VDMA classes A and B, VDS classes 0 - 1.

Go to the overview: Wall Safes.

Floor Safes

Floor safes are integrated burglar-safe storage systems placed at inconspicuous locations in the house; our floor safes are provided with a space saving design concept.

Mark Bogman Safes BV provides a broad range of floor safes of highest quality made by well-known manufacturers and certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the floor safe) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the floor safe (however, this is applicable only in case that the floor safe is fixed/anchored by using reasonable means).

Other indication of insurance classification: VDMA classes A and B.

The floor safes are available in various sizes and different safety classes.

Mark Bogman Safes BV offers a wide range of products: floor safes without insurance classification, VDMA classes A and B.

Go to the overview: Floor Safes.

Hotel Safes

Hotel safes are storage systems used for the safe storage of valuables belonging to the guests of a hotel.

Mark Bogman Safes BV provides hotel safes of the highest quality and in categories FM, TM and SG made by well-known manufacturers.

Hotel safes are available in various sizes and designs. Hotel safes are considered a must for any recommended hotel.

Go to the overview: Hotel Safes.

Safe doors

Safe doors are used to protect entire rooms from breaking and entering.

Mark Bogman Safes BV provides a broad range of safe doors of the highest quality made by well-known manufacturers and certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the safe door) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the safe door (however, this is applicable only in case that the safe door is fixed/anchored by using reasonable means).

The indication of the insurance classification is in accordance with the European standard CEN 1143-1 classes 0 - 2. Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Other indication of insurance classification: VDMA classes A and B.

Safe doors are available in various sizes and safety classes.

Mark Bogman Safes BV offers a wide range of products: safe doors of the type VDMA class B and VDS classes 0 - 2.

Go to the overview: Safe doors.

Computer and Laptop safes

Computer and Laptop safes ensure protection against unauthorized use and theft from home, office etc.

Mark Bogman Safes BV provides computer and laptop safes of high quality made by well-known manufacturers and certified in accordance with the relevant European standards.

The computer safes are available in various sizes and different safety classes.

Computer safes are very convenient for the safe storage of crucial servers; all of the computer safes are equipped with openings for ventilation needs and cabling.

Indication of insurance classification: VDMA classes A and B.

Mark Bogman Safes BV offers a wide range of products: computer safes without insurance classification, VDMA classes A and B.

Go to the overview: Computer and Laptop safes.

System safes

System safes allow excellent protection against breaking and entering making them especially suited for the large-style storage of valuables.

Mark Bogman Safes BV has on offer a wide range of products of panel and system safes/vaults of highly recommended brands of top quality certified in accordance with the relevant European standards.

The degree of resistance provided by the safety storage system is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of panel or system safe/vault) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the panel or system safe/vault (however, this is applicable only in case that panel or system safe/vault are installed in accordance with the manufacturers instructions).

The indication of the insurance classification is in accordance with the European standard CEN 1143-1 classes 0 - 13. Certification of our high-quality products is performed by an independent German technical institute, the VDS in Cologne.

Panel and system safes/vaults are available in various sizes and different safety classes.

Mark Bogman Safes BV offers a wide range of products: panel and system safes and vaults, VDS classes 0 - 13.

Go to the overview: System safes.

Storage cabinets, office cabinets, wardrobe cabinets and lockers

Storage cabinets are used for storing important company specific information in the form of folders, file folders, ring binders, suspension files etc.

Mark Bogman Safes BV provides storage cabinets, office cabinets, wardrobe cabinets and lockers of highly recommended brands in high quality certified in accordance with the relevant European standards.

The storage cabinets are made of steel. A large selection of lock types can be applied.

Office cabinets offer a wide range of solutions: roller door cabinets, drawer cabinets for large-sized technical drawings, sliding door cabinets. All cabinets ensure safe and well-arranged storage of your important files and documents.

Wardrobe cabinets are available in various sizes and suited for the most diverse purposes. We are also offering a wide range of wardrobe solutions specifically tailored to the needs of professional fire fighters (cabinets are equipped with ventilation grid).

Lockers are available in various sizes, different materials and many surface finishes.

The locker is a very flexible storage system and well suited for storing mail as well as clothing.

Go to the overview: Storage cabinets, office cabinets, wardrobe cabinets and lockers.

Custom-tailored products

Our custom-tailored products are safety storage systems in accordance with the precise needs of the customer manufactured according to the relevant sizes supplied by the customer.

Mark Bogman Safes BV offer a wide range of custom-tailored solutions: data safes, storage solutions for hazardous materials, safes and vaults, furniture safes, key boxes and key safes, cash deposit safes and deposit safes, fire protected cabinets, weapon and pistol safes, wall safes, floor safes, hotel safes and safe doors, computer and laptop safes, system safes and commercial cabinets of highly recommended brands in high quality design certified in accordance with the relevant European standards.

The degree of resistance provided by the individual safety storage systems is based upon several factors such as thickness and type of the metal used, number of locks used, and additional elements (applied to the walls of the safes/vaults/cabinets) used for slowing down the impact of adverse outside effects.

The higher the insurance classification (insurance coverage of an amount of cash stored in a house situated outside of built-up areas without alarm devices - as agreed with any individual insurance company), the stronger the construction of the safety system (however, this is applicable only in case that the system is properly anchored/ installed; exception: systems weighing above 1 metric ton).

Go to the overview: Custom-tailored products.